DescriptionGet this low-power current sensor to monitor your project every second for saving energy or protecting the circuit!This fully integrated Hall Effect-based linear STK-600/M current sensor gives precise measurements for both AC and DC currents up to 50A. The thickness of the copper conductor allows the survival of the device at high over-current conditions.The STK-600/M can output an analogue voltage signal that varies linearly with the sensed current.The input and output are designed as through-hole vias and slots, which allow for soldering thick electrical wires and T-shaped connectors. The polarity of the input power is clearly labelled on the board so users can conveniently solder wires or use metal alligator clips to make the electrical connections.The current sensor features enhanced heat dissipation and circuit-protection functions, which typically can be applied to scenarios such as motor control, load detection & management, aeromodelling, and robot over-current detection.FEATURESGravity InterfaceCompatible with T-shaped plug of aeromodellingCapable of measuring AC and DC currentsHall current sensorIsolated current measurementThe low current impedance of 0.08mΩLow-hysteresis magnetic coreInterference-free for magnet wire, external magnetic field, and geomagnetic fieldAPPLICATIONSMotor ControlLoad Detection & ManagementAeromodelling and Robot Over-current DetectionSPECIFICATIONOperating Voltage: 5VSignal Type: AnalogWithstand Voltage in Measuring: 50V(AC) / 120V(DC)Current Measurement Range: -50A to 50ASignal Bandwidth: 120kHzResponse Time: 4.6μsOperating Temperature: -40℃ to 125℃Dimension: 32×42mm/1.26×1.65″DOCUMENTSWikiSTK-600 DatasheetSHIPPING LIST1 x Analog Current Sensor 50A (AC/DC)1 x 3P Connector
